 View Large
|
Product Name : | Leakage Current Tester |
| Product Origin : | Hong Kong S.A.R., China | |
| Product Category : | Kikusui | |
| More Products : | Click here! | |
| Contact Details : | 運揚有限公司 WANCO LIMITED | |
| Product Code : | TOS3200 |
Product Details
Leakage Current Tester
鉤式電力測試儀
Model : TOS3200
The Keysight TOS3200
* Specification
Measurement erminals
Rated voltage/current
Terminals A to B: 250 V, terminal to chassis: 250 V, 100 mA
Measurement category CAT II
Effective terminal display Terminals effective to measurement are indicated with LED lamps.
Environment
Specification assured range
Temperature: 5˚C to 35˚C, humidity: 20% rh to 80% rh (no condensation)
Operating range
Temperature: 0˚C to 40˚C, humidity: 20% rh to 80% rh (no condensation)
Storage range
Temperature: –20˚C to 70˚C, humidity: 90% rh or less (no condensation)
Mounting location
Indoors, altitude of 2000 m or less
Power
Input power Nominal input rating:100Vac to 240Vac, 50/60Hz, power consumption: 70 VA max.
EUT Nominal input rating:100Vac to 240Vac, 50/60Hz
Rated output capacity: 1500 VA, maximum current: 15 A, rush current: 70 A peak max. (within 20 ms)
Insulation resistance
30 MΩ or greater (500 Vdc) (between AC line and chassis, between measurement terminal and chassis)
Withstand voltage 1390 Vac, 2 seconds/20 mA or less (between AC line and chassis)
Ground bond 25 Aac/0.1 Ω or less
Safety (*1) Conforms to the requirements of the directive and standard below.
Low Voltage Directive 2014/35/EU, EN61010-1 (Class I, Pollution degree 2)
Electromagnetic compatibility (*1, *2) Conforms to the requirements of the directive and standard below. EMC Directive 2014/30/EU, EN 61326-1 (Class A), EN 55011 (Class A, Group 1), EN61000-3-2, EN61000-3-3, Applicable conditions: All cables and wires used to connect to this product must be shorter than 3 meters.
Use the supplied test leads.
Outside dimensions, weight 320[12.60 inch] (345[13.58 inch])
W × 88[3.46 inch] (105[4.13 inch]) H × 270[10.63 inch] (335[13.19 inch]) D mm, approx. 5 kg(approx. 11.02 lbs)
Accessories 1 set of test leads (TL21-TOS: red and black, one each, with alligator clips)
1 flat probe (FP01-TOS), 1 spare fuse (15 A, for EUT power)
1 instruction manual, 1 circuit principle diagram sticker
2 power cords (for the tester and for the EUT AC line)