 View Large
|
Product Name : | Hipot and Insulation Resistance Tester |
| Product Origin : | Hong Kong S.A.R., China | |
| Product Category : | Kikusui | |
| More Products : | Click here! | |
| Contact Details : | 運揚有限公司 WANCO LIMITED | |
| Product Code : | TOS9201 |
Product Details
Hipot and Insulation Resistance Tester
高溫和絕緣電阻測試儀
Model : TOS9201
The Kikusui TOS9201
* Specification
Environment
Installation location Indoors at an altitude of up to 2000 m
Warranty range
Temperature 5 °C to 35 °C
Humidity 20 %rh to 80 %rh (No condensation)
Operating range
Temperature 0 °C to 40 °C
Humidity 20 %rh to 80 %rh (No condensation)
Storage range
Temperature -20 °C to 70 °C
Humidity 90 %rh or less (No condensation)
Power requirements
Nominal voltage range (Allowable voltage range) 100 V to 120 V AC / 200 V to 240 V AC (85 V to 130 V AC / 170 V to 250 V AC) Selectable
Power consumption
Using no load (READY) 100 VA or less
Using the rated load Maximum of 800 VA
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance 30 MΩ or more (500 V DC) [between the AC LINE and chassis]
Withstanding voltage 1500 V AC, 1 minute [between the AC LINE and chassis]
Earth continuity 25 A AC/0.1 Ω or less
Electromagnetic compatibility (EMC) (*6)
Conforms to the requirements of the following directive and standard.
EMC Directive 2004/108/EC, EN 61326-1 (Class A), EN 55011 (Class A, Group 1), EN61000-3-2, EN61000-3-3
Under following conditions
1. Used test leadwire TL01-TOS which is supplied. 2. No discharge occurs at outside of the tester.
3. Used the shielded cable which length is less than three meters when the SIGNAL I/O is used.
Safety (*6,7) Conforms to the requirements of the following directive and standard.
Low Voltage Directive 2006/95/EC , EN 61010-1 (Class I , Pollution degree 2) Class I
Dimensions(maximum) 430[16.93 inch] (455[17.91 inch]) W × 132[5.20 inch] (150[5.91 inch]) H × 370[14.57 inch] (440[17.32 inch]) D mm
Weight Approx. 19 kg (Approx.41.89 lbs)