 View Large
|
Product Name : | Combined loop and RCD testers |
| Product Origin : | Hong Kong S.A.R., China | |
| Product Category : | Megger | |
| More Products : | Click here! | |
| Contact Details : | 運揚有限公司 WANCO LIMITED | |
| Product Code : | LRCD210 |
Product Details
Combined loop and RCD testers
環路及電阻器電容器
Model : LRCD210
The Megger LRCD210 provides three phase safe non-trip loop testing and 1/2I, I, and 5I RCD testing for standard, selective and DC RCDs. Suitable for domestic installers testing to UK Part P requirement
* Specification
Voltage measurement:
(LRCD210):
0 V - 500 V
Accuracy:
±2% ±2 digits
Frequency measurement:
(LRCD210)
Range:
25Hz to 450Hz
Accuracy:
25.0Hz to 199.9Hz ±0.1Hz
200Hz to 450Hz ±1Hz
Frequency:
45Hz to 65Hz
Loop testing:
Loop ranges (to EN 61557-3)
No Trip Loop test 3-wire (Line to Earth)
(LRCD210)
Supply:
LRCD210 200V - 280 V 45Hz to 65Hz
Nominal test current:
15 mA
Loop Accuracy:
0.01 Ω - 9.99 Ω (±5% ±0.03 Ω)
10.0 Ω - 99.9 Ω (±5% ±0.5 Ω)
100 Ω - 999 Ω (±5% ±5 Ω)
1.00 kΩ - 2.00 kΩ (±5% ±30 Ω)
Prospective Fault Current (PSCC)
Prospective fault current = Nominal supply voltage/Loop
resistance
Accuracy is derived from loop test
1 A - 199 A 1 A resolution
0.20 kA - 1.99 kA 10 A resolution
2.0 kA - 19.9 kA 100 A resolution
RCD Testing
RCD Test Ranges (to EN61557-6)
LRCD210 10mA, 30mA,100mA, 300mA, 500mA
Supply voltage:
LRCD210 = 200 V - 280 V 45Hz to 65Hz
Test Current Accuracy:
No Trip Test:
(1/2I) –8% to –2%
Trip Test:
(I, 5I) +2% to +8%
Trip Time:
±1% ±1ms
Fault (Touch) Voltage
Displayed range:
0 V to 50 V
Error:
+5%/+15% ±0.5 V
Temperature and humidity
Operating Range:
-5°C to +40°C
Operating Humidity:
93% R.H. at +40°C max.
Storage Range:
-25°C to +70°C
Maximum altitude:
2000m
Environmental Protection:
IP54
Safety
IEC 61010
Meets the requirements of IEC61010-1 Cat III 300V phase to earth.
EN61557
Complies with the following parts of EN61557,Electrical safety in
low voltage systems up to 1000 V ac and 1500 V dc- Equipment for
testing, measuring or monitoring of protective measures:
Part1- General Requirements
Part3- Loop resistance
Part6- Residual current devices
Power supply
Battery: 8 x 1,5 V cells IEC LR6 type (AA alkaline).
Rechargeable: 8 x 1.2V NiCd or NiMH cells.
Battery Life: 2000 consecutive tests
Weight: All units 980gms
Dimensions: All units 203 x 148 x 78 mm
E.M.C.
In accordance with IEC61326-1