 View Large
|
Product Name : | Active Video BALUN Transceiver |
| Product Origin : | China | |
| Product Category : | Integrated CCTV monitor/camera systems | |
| More Products : | Click here! | |
| Contact Details : | ShenZhen HOOTAC Electronics Technology Co., Ltd. | |
| Product Code : | HT801TR |
Product Details
Model HT801R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1.2km using Category-5 Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The unparalleled interference rejection and low emissions of the Model HT801T+HT801R allows long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.
MDL | HT801T Single Transmitter HT801R Single Transmitter |
Des | Distance:1000-3000ft Lightning Surge Protection PWR:+9V to +12V Cable: CAT5/5E up 24AWG(Φ0.5)or higher |
Instructions for installmen
1:Put the video signals you need in the VIDEO IN of HT801.
2: Put a twisted-pair in the VIDEO+, - of HT801T and HT801R respectively.
3: Connect with the mains following instructions shown in the sketch map, make sure that the power should be between DC/AC 9 to 24V.
4: set the position of ADJ correctly following the instructions shown below.
5: after the four steps, the VIDEO OUT of UTP101AR is ready to work..
Product Attachment
| File Name : ht801at_133101.gif |
| File Size : 3.16KB File Type : image/gif |
