 View Large
|
Product Name : | Insulation Resistance Tester |
| Product Origin : | Hong Kong S.A.R., China | |
| Product Category : | Kikusui | |
| More Products : | Click here! | |
| Contact Details : | 運揚有限公司 WANCO LIMITED | |
| Product Code : | TOS7200 |
Product Details
Insulation Resistance Tester
絕緣電阻計
Model : TOS7200
The Kikusui TOS7200
* Specification
Output section
Output voltage range -25 V to -1000 V x 1 V
Accuracy ±(1.5 % of setting + 2 V)
Maximum rated load 1 W (1 000 V/1 mA)
Maximum rated current 1 mA
Output terminals
Output type Floating
Isolation voltage ±1000 VDC
Ripple 1000 V / under no load 2 Vp-p or less
Maximum rated load 10 Vp-p or less
Short-circuiting current 12 mA or less
Output rise time 50 ms or less (10 % to 90 %) [no load]
Discharge function Forced discharge at the end of test (discharge resistance: 25 kΩ)
Environment
Installation location Indoors and at altitudes up to 2000 m
Warranty range
Temperature 5 °C to 35 °C
Humidity 20 %rh to 80 %rh (no condensation)
Operating range
Temperature 0 °C to 40 °C
Humidity 20 %rh to 80 %rh (no condensation)
Storage range
Temperature -20 °C to 70 °C
Humidity 90 %rh or less (no condensation)
Power requirements
Nominal voltage range
(allowable voltage range)
100 V to 240 V AC
(85 V to 250 V AC)
Power consumption
At rated load 30 VA maximum
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance 30 MΩ or more (500 V DC) [AC LINE to chassis]
Hipot 1390 V AC for 2 seconds, 10 mA or less [AC LINE to chassis]
Ground bond 25 A AC / 0.1 Ω or less
Electromagnetic compatibility (EMC)
Conforms to the requirements of the following directive and standard.
EMC Directive 2004/108/EC
EN 61326-1 (Class A) EN 55011 (Class A, Group 1)
EN 61000-3-2
EN 61000-3-3
Under following conditions
1. Used HV test leadwires TL08-TOS which is supplied.
2. No discharge occurs at outside of the tester.
Safety
Conforms to the requirements of the following directive and standard.
Low Voltage Directive 2006/95/EC
EN 61010-1
Class I
Pollution degree 2
Dimensions
(maximum)
215[8.46 inch] W × 66[2.60 inch] (85[3.35 inch]) H × 230[9.06 inch] (260[10.24 inch]) D mm
Weight Approx. 2 kg (Approx.4.41 lbs)
Accessories
AC power cable 1 pc.
TL08-TOS high-voltage test leadwires (1.5 m) 1 set
Operation Manual 1 copy
3. Used the shielded cable which length is less than three meters when the
SIGNAL I/O is used.